Ihe nleba anya ihuenyo mmetụ 19 inch dị elu PCAP Touch
Nkọwapụta:
| Izugbe | |
| Nlereanya | COT190-CFF03-1000 |
| Usoro | Ihe mkpuchi mmiri na ihuenyo dị larịị |
| Ụdị LCD | 19” Matrix TFT-LCD na-arụ ọrụ |
| Ntinye vidiyo | VGA, DVI na HDMI |
| OSD njikwa | Kwe ka mgbanwe n'ihuenyo nke ihie, oke ọdịiche, gbanwee akpaaka, usoro, elekere, ebe H/V, asụsụ, ọrụ, tọgharịa |
| Ịnye ọkụ | Ụdị: brik dị n'èzí Ntinye (akara) voltaji: 100-240 VAC, 50-60 Hz Voltaji mmepụta / ugbu a: 12 volts na 4 amps max |
| Ugwu Interface | 1) VESA 75mm na 100mm 2) Mgbado ugwu, kehoraizin ma ọ bụ vetikal |
| Nkọwapụta LCD | |
| Mpaghara nọ n'ọrụ (mm) | 376.320 (H) × 301.060 (V) |
| Mkpebi | 1280×1024@60Hz |
| Ntụpọ ntụpọ(mm) | 0.294 × 0.294 |
| Ntinye aka Voltage VDD | +5.0V (Ụdị) |
| Akụkụ nlele (v/h) | 80°/85° |
| Ntughari | 1000:1 |
| Ọkụ (cd/m2) | 1000 |
| Oge nzaghachi (na-ebili) | 3.6s / 1.4s |
| Agba nkwado | 16.7M agba |
| Ìhè azụ MTBF(hr) | 30000 |
| Nkọwapụta ihuenyo mmetụ | |
| Ụdị | Ihuenyo mmetụ aka Cjtouch Projected Capacitive |
| Otutu aka | 10 isi aka |
| Metụ okirikiri ndụ | nde iri |
| Metụ Sistemu interface | USB interface |
| Oriri ike | +5V@80mA |
| Ihe nkwụnye ọkụ AC mpụga | |
| Mpụta | DC 12V / 4A |
| Ntinye | 100-240 VAC, 50-60 Hz |
| MTBF | 50000 awa na 25 Celsius |
| gburugburu | |
| Okpomọkụ na-arụ ọrụ. | 0 ～50C |
| Okpomọkụ nchekwa. | -20 ~ 60 Celsius |
| RH na-arụ ọrụ: | 20% ~ 80% |
| Nchekwa RH: | 10% ~ 90% |
Ngwa:
eriri USB 180cm * 1 PC,
VGA USB 180cm*1 PC,
eriri ọkụ nwere ihe nkwụnye ọkụ * 1 PC,
Mpempe akwụkwọ * 2 PC.
Ngwa:
♦ Kiosks ozi
♦ Igwe eji egwu egwu, Lottery, POS, ATM na Museum Library
♦ Ọrụ gọọmentị na ụlọ ahịa 4S
♦ Eletrọnịkị katalọgụ
♦ Ọzụzụ dabere na kọmpụta
♦ Educationin na nlekọta ahụike ụlọ ọgwụ
♦ Mgbasa ozi akara dijitalụ
♦ Usoro nchịkwa ụlọ ọrụ
♦ AV Equip & Rental azụmahịa
♦ Ngwa ịme anwansị
♦ 3D Visualization / 360 Deg Walkthrough
♦ Tebụl mmetụ mmekọrịta
♦ Nnukwu ụlọ ọrụ
FAQ
1. Gịnị kpatara m ga-eji họrọ CJTOUCH?
Anyị bụ ndị ọkachamara emeputa nke ihuenyo mmetụ aka PC na ihe nleba anya na ahụmịhe afọ 12.
2. Gịnị bụ isi ngwaahịa gị?
Ngwaahịa anyị bụ isi bụ SAW/PCAP/IR ihuenyo mmetụ,SAW/PCAP/IR ihuenyo mmetụ,desktọpụ nlekota na ihe niile n'otu PC mmetụ.
3. Kedu nha ị na-enye?
SAW ihuenyo mmetụ/nleba anya sitere na 8"-32"
Ihuenyo mmetụ IR / ihe nleba anya sitere na 10.4 ”-110”
PCAP ihuenyo mmetụ/nleba anya sitere na 5"-65"
Ihuenyo mmetụ na-eguzogide / ihe nleba anya sitere na 10.4 "-21.5"
Metụ foil nso/nleba anya site na 15"-86"
